Difference between revisions of "0x0001"

From SimsWiki
Jump to: navigation, search
(Auto-inserted from WakkaWikki)
 
(Reformatted and rewrote intro)
Line 1: Line 1:
{{OldWikiEntry}} This page documents the contents of STR# resource 7fe59fd0-000000dc-00000000 in TSData/Res/Objects/objects.package.
+
==Generic Sims Call==
 +
This primitive allows the manipulation of many elements of game play which do not have their own primitives, and cannot be achieved in globals. An identifier for the particular task to be run is passed in operand 0, with any remaining data generally stored in Temp variables as described below.
  
As it were it seems that All of the generic sims calls are done through the first operand byte. These bytes are referenced from a text Entry in the Objects .package file and are used to do in-game things like, disabling/enabling the build-buy modes, or turning of all of the other options like save/exit/etc.
+
==Tasks (Operand 0)==
 +
;0x0(0) Exit Lot
 +
:Exits the lot (for use in Tutorial) - Temp0=neighborhoodID; Temp1=0/leave family in lot, Non-Zero/evict family; Temp2=0/no save lot, Non-Zero/save lot; Temp3=0/no reset tutorial episode, Non-Zero/reset tutorial episode
 +
;0x1(1) center view on stack object
 +
:Centers the main game window on the stack object.
 +
;0x2(2) set action icon to stack object
 +
:Sets the icon of my current action to the stack object's thumbnail.
 +
;0x3(3) uncenter view
 +
:If the center function was used recently, centers the main game view to where it was before that call.
 +
;0x4(4) add to family
 +
:Adds the neighbor with id in stack object to the family ID passed in via Temp 0. If this id is 0, then the current family is used. If this id is a non valid family ID (like -1), then a new family will be constructed.
 +
;0x5(5) combine assets of family in temp 0
 +
:Adds the net worth from the family in Temp 0 to the current family.
 +
;0x6(6) remove from family
 +
:Remove the neighbor specified in the stack object from the current family.
 +
;0x7(7) deprecated - make new neighbor
 +
:No longer implemented. tree error. Make a copy of the neighbor id in the stack object. New neighbor id is also returned in the stack object.
 +
;0x8(8) family tutorial complete
 +
:Marks the family tutorial as being finishes.
 +
;0x9(9) architecture tutorial complete
 +
:Marks the architecture tutorial as completed.
 +
;0xA(10) disable build and buy
 +
:Temporarily disables the build and buy buttons in the user interface. Only to be used for special situations.
 +
;0xB(11) enable build and buy
 +
:After the disable call has been made, re-enables the build and buy buttons in the user interface. Only to be used for special situations.
 +
;0xC(12) get distance to camera in temp 0
 +
:For the stack object, computes an integer in temp 0 that varies increasingly the further an object is from the camera.
 +
;0xD(13) abort interactions
 +
:Aborts all interactions associated with the stack object.
 +
;0xE(14) house radio station := temp 0
 +
:Sets the global house radio station to number provided in temp 0.
 +
;0xF(15) My routing footprint := temp 0
 +
:Set the footprint extension of me to the value in temp 0
 +
;0x10(16) change normal outfit
 +
:Changes the normal suit of the person to the next available suit.
 +
;0x11(17) Swap Lot
 +
:Pass in lot ID you want to change to inside of Temp 0
 +
;0x12(18) Set Simulator Speed
 +
:Pass in temp 0 speed you want. 0 = pause, 1 = unpause, 2 = normal, 3 = fast, 4 = Ultra
 +
;0x13(19) Swap Lot to Lot of Family in NeighborID in temp0
 +
:Pass in neighbor ID in temp 0 and lot will get swapped to that family's lot.
 +
;0x14(20) Swap Lot via Family in Temp 0
 +
:Put Family number in Temp 0 and lot will get swapped to their family lot.
 +
;0x15(21) Add Child to Family Relationship Array
 +
:Put a new child in the family tree array, passing in neighbor ID of new child in temp 0 and Parent NID in Temp 1
 +
;0x16(22) Add Spouse to Family Relationship Array
 +
:Put a new Spouse in the family tree array, passing in neighbor ID of new spouse in temp 0 - temp 1 is neighbor ID of initial Spouse
 +
;0x17(23) Remove From Family Relationship Array
 +
:Remove relationships between two Sims in the family tree array, passing in neighbor ID of Sim to remove in temp 0 - temp 1 is neighbor ID of the relative
 +
;0x18(24) Preload New Sim Age
 +
:Given age in temp 0 (Same age range as SetAge Primitive uses), preload resources for this sim.
 +
;0x19(25) Set Selected Sim
 +
:Set the selected sim to the sim person object ID in temp 0
 +
;0x1A(26) Start Lot Transition
 +
:This call will exit the lot (not sure if it saves) and bring up the neighborhood in a mode where you can select a community lot to go to and then load that lot.
 +
;0x1B(27) Get Number of community lots in temp0
 +
:Gets the number of community lots in temp 0
 +
;0x1C(28) Perform Money Effect
 +
:If a minus sign is required, make sure the value passed in temp 0 is negative. Temp 2 will contain the multiplier for this value - if it's set to 0 then the code will assume you meant 1.
 +
;0x1D(29) Preload Visitor
 +
:Temp 0 contains the neighborID of the visitor you wish to preload - preloading takes approx 2 seconds (minimum)
 +
;0x1E(30) Preload Clothing
 +
:The outfit to preload is in Temp0 (comes from the drop down in Change Outfit) - takes 1/2 second to preload.
 +
;0x1F(31) Preload Object
 +
:Place GUID of object to be loaded in temp0/1 for object to be preloaded on separate thread.
 +
;0x20(32) Get Outfits Information
 +
:Place outfit Type in Temp0 and this will return how many outfits there are available for that type on the current ME in temp 1
 +
;0x21(33) Update Footprint
 +
:Used when you change intersection flags, to update the path planner with the change
 +
;0x22(34) Get Distance Between Lots
 +
:Source Lot ID in Temp 0, Destination Lot ID in Temp 1. Returns distance in Temp 2. Lot ID is same as House Number.
 +
;0x23(35) Get Zoning Type
 +
:Lot ID in Temp 0. Returns Zoning Type in Temp 1. 0= Residential. 1= Community.
 +
;0x24(36) GetIDOfFamilyInLot
 +
:Lot ID in Temp 0. Returns ID of the family residing in the lot in Temp 1. If there is no family in lot, Temp 1 will have -1 upon return.
 +
;0x25(37) LotTransitionDone
 +
:Needs to be sent after every lot load.
 +
;0x26(38) UnlinkCharacter
 +
:Neighbor ID in Temp 0. Removes all 3D and Edith resources associated with the character, leaving only UI representation.
 +
;0x27(39) Force Recalc of Wants
 +
:Forces a recalc of whatever the current Sim is. Ensure this is only called when Me is a sim.
 +
;0x28(40) Game State Transition Control
 +
:If Temp 0 == 0, the below items will be Disabled. If Temp 0 != 0, the below will be Enabled. (This disables/enables: saving, quitting, exiting to the neighborhood, lot transitions, and lot entry.)
 +
;0x29(41) Facial Overlay Zits Toggle
 +
:Temp0 == Off (0) / On (1)
 +
;0x2A(42) Sim Fitness Update
 +
:Syncs the 3D view of the sim to the simulator body settings (fit, fat, normal)
 +
;0x2B(43) Is It Ok to Idle Here
 +
;0x2C(44) Hide / Unhide Puck
 +
:Hide or unhide puck based on value in temp 0 - if non zero puck is hidden. Don't try and hide the puck twice without restoring it, that will cause an error
 +
;0x2D(45) Copy Last Name
 +
:Copy Last name from object id in Temp 0 to Object in Stack object.
 +
;0x2E(46) Set Sim Hair Override
 +
:Called on a sim, this will override the current hair the sim is wearing. Temp0 is the table Id, Temp1 is the index Id. This string is the FamilyId to search for in the Skin Catalogue for the override hair (for the given age/gender/haircolor of the sim). If Temp3 is set to 1, fallback to globals can happen if the string isn't found.
 +
;0x2F(47) Clear Sim Hair Override
 +
:Clears any hair overrides present on the sim.
 +
;0x30(48) Get Remapped Neighbor Id
 +
:For imported lots (message broadcast would be "import lot"), pass in Temp 0 the old neighbor id, and the remapped/new neighbor id will be set in Temp 1. Will return true if a remapped id is found, false otherwise.
 +
;0x31(49) Can Change Footprint?
 +
:Tests whether a footprint change would cause intersection with another object's footprint. Pass the footprint index in temp 0.
 +
;0x32(50) Extract Money From other Lot
 +
:Temp 0 if non zero means take money from other lot. Temp 1 contains neighborID of sim from other lot to take money from. Temp 2 contains percentage of money we want to add to this lot. temp3/4 contain the amount of money added to this lot post call. If temp 5 is zero, then we get the money from the funds of the lot the neighborID came from. If it's non zero, then we get the funds from the lot assets of the lot the neighborID came from.
 +
;0x33(51) Show Info On Lot Loading Screen
 +
:Pass in Temp 0: 1 == to show dialog for NPCs and Townies generation
 +
;0x34(52) Wall in Front?
 +
:Direction in temp 0. Returns true if there is a wall within 1.5 tiles in that direction. Returns first object on that tile in temp 1, if there is a wall.
 +
;0x35(53) Set Facial Overlay State
 +
:Temp0 is the table Id, Temp1 is the index Id, Temp2 is the state (1 == on, 0 == off), Temp3 can be set to 1 to allow fallback to globals.
  
"Behaviors Group/Texts Lists/Generic Sims Calls" is the packed file that they are contained in. There are also descriptions in there that tell you how they are used.
+
==References==
 +
This data is taken from STR# resource 7fe59fd0-000000dc-00000000 in TSData/Res/Objects/objects.package.
  
Not very organized at the moment, but I promise, I'll make it look nice.
+
[[Category:Modding]]
 
+
0x0(0) Exit Lot Exits the lot (for use in Tutorial) - Temp0=neighborhoodID; Temp1=0/leave family in lot, Non-Zero/evict family; Temp2=0/no save lot, Non-Zero/save lot; Temp3=0/no reset tutorial episode, Non-Zero/reset tutorial episode
+
0x1(1) center view on stack object Centers the main game window on the stack object.
+
0x2(2) set action icon to stack object Sets the icon of my current action to the stack object's thumbnail.
+
0x3(3) uncenter view If the center function was used recently, centers the main game view to where it was before that call.
+
0x4(4) add to family Adds the neighbor with id in stack object to the family ID passed in via Temp 0. If this id is 0, then the current family is used. If this id is a non valid family ID (like -1), then a new family will be constructed.
+
0x5(5) combine assets of family in temp 0 Adds the net worth from the family in Temp 0 to the current family.
+
0x6(6) remove from family Remove the neighbor specified in the stack object from the current family.
+
0x7(7) depracated - make new neighbor No longer implemented. tree error. Make a copy of the neighor id in the stack object. New neighbor id is also returned in the stack object.
+
0x8(8) family tutorial complete Marks the family tutorial as being finishes.
+
0x9(9) architecture tutorial complete Marks the architecture tutorial as completed.
+
0xA(10) disable build and buy Temporarily disables the build and buy buttons in the user interface. Only to be used for special situations.
+
0xB(11) enable build and buy After the disable call has been made, re-enables the build and buy buttons in the user interface. Only to be used for special situations.
+
0xC(12) get distance to camera in temp 0 For the stack object, computes an integer in temp 0 that varies increasingly the further an object is from the camera.
+
0xD(13) abort interactions Aborts all interactions associated with the stack object.
+
0xE(14) house radio station := temp 0 Sets the global house radio station to number provided in temp 0.
+
0xF(15) My routing footprint := temp 0 Set the footprint extension of me to the value in temp 0
+
0x10(16) change normal outfit Changes the normal suit of the person to the next availlable suit.
+
0x11(17) Swap Lot Pass in lot ID you want to change to inside of Temp 0
+
0x12(18) Set Simulator Speed Pass in temp 0 speed you want. 0 = pause, 1 = unpause, 2 = normal, 3 = fast, 4 = Ultra
+
0x13(19) Swap Lot to Lot of Family in NeighborID in temp0 Pass in neighbor ID in temp 0 and lot will get swapped to that familys lot.
+
0x14(20) Swap Lot via Family in Temp 0 Put Family number in Temp 0 and lot will get swapped to their family lot.
+
0x15(21) Add Child to Family Relationship Array Put a new child in the family tree array, passing in neighbor ID of new child in temp 0 and Parent NID in Temp 1
+
0x16(22) Add Spouse to Family Relationship Array Put a new Spouse in the family tree array, passing in neighbor ID of new spouse in temp 0 - temp 1 is neighbor ID of inital Spouse
+
0x17(23) Remove From Family Relationship Array Remove relationships between two Sims in the family tree array, passing in neighbor ID of Sim to remove in temp 0 - temp 1 is neighbor ID of the relative
+
0x18(24) Preload New Sim Age Given age in temp 0 (Same age range as SetAge Primitive uses), preload resources for this sim.
+
0x19(25) Set Selected Sim Set the selected sim to the sim person object ID in temp 0
+
0x1A(26) Start Lot Transition This call will exit the lot (not sure if it saves) and bring up the neighborhood in a mode where you can select a community lot to go to and then load that lot.
+
0x1B(27) Get Number of community lots in temp0 Gets the number of community lots in temp 0
+
0x1C(28) Perform Money Effect If a minus sign is required, make sure the value passed in in temp 0 is negative. Temp 2 will contain the multiplier for this value - if it's set to 0 then the code will assume you meant 1.
+
0x1D(29) Preload Visitor Temp 0 contains the neighborID of the visitor you wish to preload - preloading takes approx 2 seconds (minimum)
+
0x1E(30) Preload Clothing The outfit to preload is in Temp0 (comes from the drop down in Change Outfit) - takes 1/2 second to preload.
+
0x1F(31) Preload Object Place GUID of object to be loaded in temp0/1 for object to be preloaded on seperate thread.
+
0x20(32) Get Outfits Information Place outfit Type in Temp0 and this will return how many outfits there are available for that type on the current ME in temp 1
+
0x21(33) Update Footprint Used when you change intersection flags, to update the path planner with the change
+
0x22(34) Get Distance Between Lots Source Lot ID in Temp 0, Destination Lot ID in Temp 1. Returns distance in Temp 2. Lot ID is same as House Number.
+
0x23(35) Get Zoning Type Lot ID in Temp 0. Returns Zoning Type in Temp 1. 0= Residential. 1= Community.
+
0x24(36) GetIDOfFamilyInLot Lot ID in Temp 0. Returns ID of the family residing in the lot in Temp 1. If there is no family in lot, Temp 1 will have -1 upon return.
+
0x25(37) LotTransitionDone Needs to be sent after every lot load.
+
0x26(38) UnlinkCharacter Neighbor ID in Temp 0. Removes all 3D and Edith resources associated with the character, leaving only UI representation.
+
0x27(39) Force Recalc of Wants Forces a recalc of whatever the current Sim is. Ensure this is only called when Me is a sim.
+
0x28(40) Game State Transition Control If Temp 0 == 0, the below items will be Disabled. If Temp 0 != 0, the below will be Enabled. (This disables/enables: saving, quitting, exiting to the neighborhood, lot trasitions, and lot entry.)
+
0x29(41) Facial Overlay Zits Toggle Temp0 == Off (0) / On (1)
+
0x2A(42) Sim Fitness Update Syncs the 3D view of the sim to the simulator body settings (fit, fat, normal)
+
0x2B(43) Is It Ok to Idle Here
+
0x2C(44) Hide / Unhide Puck Hide or unhide puck based on value in temp 0 - if non zero puck is hidden. Don't try and hide the puck twice without restoring it, that will cause an error
+
0x2D(45) Copy Last Name Copy Last name from object id in Temp 0 to Object in Stack object.
+
0x2E(46) Set Sim Hair Override Called on a sim, this will override the current hair the sim is wearing. Temp0 is the table Id, Temp1 is the index Id. This string is the FamilyId to search for in the Skin Catalog for the override hair (for the given age/gender/haircolor of the sim). If Temp3 is set to 1, fallback to globals can happen if the string isn't found.
+
0x2F(47) Clear Sim Hair Override Clears any hair overrides present on the sim.
+
0x30(48) Get Remapped Neighbor Id For imported lots (message broadcast would be "import lot"), pass in Temp 0 the old neighbor id, and the remapped/new neighbor id will be set in Temp 1. Will return true if a remapped id is found, false otherwise.
+
0x31(49) Can Change Footprint? Tests whether a footprint change would cause intersection with another object's footprint. Pass the footprint index in temp 0.
+
0x32(50) Extract Money From other Lot Temp 0 if non zero means take money from other lot. Temp 1 contains neighborID of sim from other lot to take money from. Temp 2 contains percentage of money we want to add to this lot. temp3/4 contain the amount of money added to this lot post call. If temp 5 is zero, then we get the money from the funds of the lot the neighborID came from. If it's non zero, then we get the funds from the lot assets of the lot the neighborID came from.
+
0x33(51) Show Info On Lot Loading Screen Pass in Temp 0: 1 == to show dialog for NPCs and Townies generation
+
0x34(52) Wall in Front? Direction in temp 0. Returns true if there is a wall within 1.5 tiles in that direction. Returns first object on that tile in temp 1, if there is a wall.
+
0x35(53) Set Facial Overlay State Temp0 is the table Id, Temp1 is the index Id, Temp2 is the state (1 == on, 0 == off), Temp3 can be set to 1 to allow fallback to globals. [[Category:Modding]]
+

Revision as of 02:57, 18 June 2006

Generic Sims Call

This primitive allows the manipulation of many elements of game play which do not have their own primitives, and cannot be achieved in globals. An identifier for the particular task to be run is passed in operand 0, with any remaining data generally stored in Temp variables as described below.

Tasks (Operand 0)

0x0(0) Exit Lot
Exits the lot (for use in Tutorial) - Temp0=neighborhoodID; Temp1=0/leave family in lot, Non-Zero/evict family; Temp2=0/no save lot, Non-Zero/save lot; Temp3=0/no reset tutorial episode, Non-Zero/reset tutorial episode
0x1(1) center view on stack object
Centers the main game window on the stack object.
0x2(2) set action icon to stack object
Sets the icon of my current action to the stack object's thumbnail.
0x3(3) uncenter view
If the center function was used recently, centers the main game view to where it was before that call.
0x4(4) add to family
Adds the neighbor with id in stack object to the family ID passed in via Temp 0. If this id is 0, then the current family is used. If this id is a non valid family ID (like -1), then a new family will be constructed.
0x5(5) combine assets of family in temp 0
Adds the net worth from the family in Temp 0 to the current family.
0x6(6) remove from family
Remove the neighbor specified in the stack object from the current family.
0x7(7) deprecated - make new neighbor
No longer implemented. tree error. Make a copy of the neighbor id in the stack object. New neighbor id is also returned in the stack object.
0x8(8) family tutorial complete
Marks the family tutorial as being finishes.
0x9(9) architecture tutorial complete
Marks the architecture tutorial as completed.
0xA(10) disable build and buy
Temporarily disables the build and buy buttons in the user interface. Only to be used for special situations.
0xB(11) enable build and buy
After the disable call has been made, re-enables the build and buy buttons in the user interface. Only to be used for special situations.
0xC(12) get distance to camera in temp 0
For the stack object, computes an integer in temp 0 that varies increasingly the further an object is from the camera.
0xD(13) abort interactions
Aborts all interactions associated with the stack object.
0xE(14) house radio station 
= temp 0
Sets the global house radio station to number provided in temp 0.
0xF(15) My routing footprint 
= temp 0
Set the footprint extension of me to the value in temp 0
0x10(16) change normal outfit
Changes the normal suit of the person to the next available suit.
0x11(17) Swap Lot
Pass in lot ID you want to change to inside of Temp 0
0x12(18) Set Simulator Speed
Pass in temp 0 speed you want. 0 = pause, 1 = unpause, 2 = normal, 3 = fast, 4 = Ultra
0x13(19) Swap Lot to Lot of Family in NeighborID in temp0
Pass in neighbor ID in temp 0 and lot will get swapped to that family's lot.
0x14(20) Swap Lot via Family in Temp 0
Put Family number in Temp 0 and lot will get swapped to their family lot.
0x15(21) Add Child to Family Relationship Array
Put a new child in the family tree array, passing in neighbor ID of new child in temp 0 and Parent NID in Temp 1
0x16(22) Add Spouse to Family Relationship Array
Put a new Spouse in the family tree array, passing in neighbor ID of new spouse in temp 0 - temp 1 is neighbor ID of initial Spouse
0x17(23) Remove From Family Relationship Array
Remove relationships between two Sims in the family tree array, passing in neighbor ID of Sim to remove in temp 0 - temp 1 is neighbor ID of the relative
0x18(24) Preload New Sim Age
Given age in temp 0 (Same age range as SetAge Primitive uses), preload resources for this sim.
0x19(25) Set Selected Sim
Set the selected sim to the sim person object ID in temp 0
0x1A(26) Start Lot Transition
This call will exit the lot (not sure if it saves) and bring up the neighborhood in a mode where you can select a community lot to go to and then load that lot.
0x1B(27) Get Number of community lots in temp0
Gets the number of community lots in temp 0
0x1C(28) Perform Money Effect
If a minus sign is required, make sure the value passed in temp 0 is negative. Temp 2 will contain the multiplier for this value - if it's set to 0 then the code will assume you meant 1.
0x1D(29) Preload Visitor
Temp 0 contains the neighborID of the visitor you wish to preload - preloading takes approx 2 seconds (minimum)
0x1E(30) Preload Clothing
The outfit to preload is in Temp0 (comes from the drop down in Change Outfit) - takes 1/2 second to preload.
0x1F(31) Preload Object
Place GUID of object to be loaded in temp0/1 for object to be preloaded on separate thread.
0x20(32) Get Outfits Information
Place outfit Type in Temp0 and this will return how many outfits there are available for that type on the current ME in temp 1
0x21(33) Update Footprint
Used when you change intersection flags, to update the path planner with the change
0x22(34) Get Distance Between Lots
Source Lot ID in Temp 0, Destination Lot ID in Temp 1. Returns distance in Temp 2. Lot ID is same as House Number.
0x23(35) Get Zoning Type
Lot ID in Temp 0. Returns Zoning Type in Temp 1. 0= Residential. 1= Community.
0x24(36) GetIDOfFamilyInLot
Lot ID in Temp 0. Returns ID of the family residing in the lot in Temp 1. If there is no family in lot, Temp 1 will have -1 upon return.
0x25(37) LotTransitionDone
Needs to be sent after every lot load.
0x26(38) UnlinkCharacter
Neighbor ID in Temp 0. Removes all 3D and Edith resources associated with the character, leaving only UI representation.
0x27(39) Force Recalc of Wants
Forces a recalc of whatever the current Sim is. Ensure this is only called when Me is a sim.
0x28(40) Game State Transition Control
If Temp 0 == 0, the below items will be Disabled. If Temp 0 != 0, the below will be Enabled. (This disables/enables: saving, quitting, exiting to the neighborhood, lot transitions, and lot entry.)
0x29(41) Facial Overlay Zits Toggle
Temp0 == Off (0) / On (1)
0x2A(42) Sim Fitness Update
Syncs the 3D view of the sim to the simulator body settings (fit, fat, normal)
0x2B(43) Is It Ok to Idle Here
0x2C(44) Hide / Unhide Puck
Hide or unhide puck based on value in temp 0 - if non zero puck is hidden. Don't try and hide the puck twice without restoring it, that will cause an error
0x2D(45) Copy Last Name
Copy Last name from object id in Temp 0 to Object in Stack object.
0x2E(46) Set Sim Hair Override
Called on a sim, this will override the current hair the sim is wearing. Temp0 is the table Id, Temp1 is the index Id. This string is the FamilyId to search for in the Skin Catalogue for the override hair (for the given age/gender/haircolor of the sim). If Temp3 is set to 1, fallback to globals can happen if the string isn't found.
0x2F(47) Clear Sim Hair Override
Clears any hair overrides present on the sim.
0x30(48) Get Remapped Neighbor Id
For imported lots (message broadcast would be "import lot"), pass in Temp 0 the old neighbor id, and the remapped/new neighbor id will be set in Temp 1. Will return true if a remapped id is found, false otherwise.
0x31(49) Can Change Footprint?
Tests whether a footprint change would cause intersection with another object's footprint. Pass the footprint index in temp 0.
0x32(50) Extract Money From other Lot
Temp 0 if non zero means take money from other lot. Temp 1 contains neighborID of sim from other lot to take money from. Temp 2 contains percentage of money we want to add to this lot. temp3/4 contain the amount of money added to this lot post call. If temp 5 is zero, then we get the money from the funds of the lot the neighborID came from. If it's non zero, then we get the funds from the lot assets of the lot the neighborID came from.
0x33(51) Show Info On Lot Loading Screen
Pass in Temp 0: 1 == to show dialog for NPCs and Townies generation
0x34(52) Wall in Front?
Direction in temp 0. Returns true if there is a wall within 1.5 tiles in that direction. Returns first object on that tile in temp 1, if there is a wall.
0x35(53) Set Facial Overlay State
Temp0 is the table Id, Temp1 is the index Id, Temp2 is the state (1 == on, 0 == off), Temp3 can be set to 1 to allow fallback to globals.

References

This data is taken from STR# resource 7fe59fd0-000000dc-00000000 in TSData/Res/Objects/objects.package.

Personal tools
Namespaces

Variants
Actions
Navigation
game select
Toolbox