Difference between revisions of "ShaderFloor"

Revision as of 15:52, 16 March 2007

EP5-SS
0xCD7FE87A
0x1C0532FA
0x3D102419
0xFF164DEA
# floor

#
# Shaders for indoor & outdoor tiles; i.e., "Floors".
#
#

seti gridLayer 13
seti floorLayer -4
setf floorMaterialScaleU 1.0  # defaults for Floor materials without these defined
setf floorMaterialScaleV 1.0  # defaults for Floor materials without these defined
setb floorHighlightOn false
setc floorHighlightIntensity (0.25, 0.25, 0.25, 1.0)  # attenuation of the floor highlight texture
setf floorGridAlpha 0.775
seti previewLayer 0 # -28

# debug options for PS hardware only, only set one of these to true
setb debugShowFloorIncidence false   # shows the incidence maps as color
setb debugShowFloorNormalMap false   # shows the raw normal map (if it exists)
setb debugFloorLighting false       # no base texture, only lighting results
setb debugShowLightMapTexcoords false  # texcoords as color


setb floorCausticsPass false
seti floorRenderStyle 0
setb hasCutout false

include PixelShaderFloors.matShad


#beginshader Floor
#description Basic floor tile shader; texture + floor gradient + shadows
#extraparam float floorMaterialScaleU 1 0.125 64 ; no. tiles to map across U axis, use any positive number
#extraparam float floorMaterialScaleV 1 0.125 64 ; no. tiles to map across V axis, use any positive number
define Floor()
   material
      if ($stdMatLightingDebug)
         create LightingDebugStandardMaterialOverrides()
      endif
      create FloorShaders()
   end
enddef
#endshader


#beginshader FloorPool
#description Pool tile shader, with caustics.
#extraparam bool floorCausticsPass 1 ; set to true to add water caustics.
define FloorPool()
   material
      if ($stdMatLightingDebug)
         create LightingDebugStandardMaterialOverrides()
      endif
      create FloorShaders()
   end
enddef
#endshader




#
# Standard floor shaders
#
define FloorShaders()

   if (viewerRenderType = $kRenderTypeShadowMap)
	   create ShadowMapVS_PS()
	else
	   setb bumpMapFloors false

	   create DetermineHardwareSupport()
   	
	   setb hasTexcoord2 (hasVertexFormat(texcoord,1))
   	
      # check for the page, the global bumpmap glag, and for the normal map in the material
	   if (varExists(page) and $bumpMapping and $stdMatNormalMapTextureEnabled and $hasTexcoord2)
		   setb bumpMapFloors true
	   endif

      if ($useHWShader1Path or $useHWShader2Path)
   	
		   create PixelShaderFloors($bumpMapFloors)
   		
	   else
      
		   # fixed function paths NEVER get bump mapping due to fill rate and memory concerns.
   	
		   create FixedFunctionFloorShader()  

		   # ultimate fallback pass? no light map, one stage. 
		   shader -layer $floorLayer
			   validateRenderShaderContext -vertexFormat position 0 required
			   validateRenderShaderContext -vertexFormat normal 0 required
			   validateRenderShaderContext -vertexFormat texcoord 0 required
			   validateRenderShaderContext -viewerRenderType viewerRenderType
   			
			   pass -fixedFunction
				   create LightingStates()
				   create AttenuatedMatCoef(1)
				   fillmode $stdMatFillMode
   				
				   if ($hasCutout)                         
                  depthTestFunction acceptIfEqual
               else
                  depthTestFunction acceptIfLessOrEqual
               endif

				   stage
					   texture $stdMatBaseTextureName ${stdMatBaseTextureParam}
					   textureAddressing tile tile
					   ffTextureMatrix -scalev (1/$floorMaterialScaleU, 1/$floorMaterialScaleV)
					   textureTransformType vector2
					   ffTextureCoordsSource 0
					   textureBlend multiplyScale2(texture diffuse) select(outRegister)
				   end 
			   end

			   create HighlightPass()
   			
		   end
	   endif
	endif
	
enddef

#
# Standard floor shader,
#
define FixedFunctionFloorShader()
   
   setb lightMapAvailable false
   if (varExists(page))
      setb lightMapAvailable true
   endif
   
   setb caustics false
   if ($floorCausticsPass and $causticsEnabled)
      setb caustics true
   endif   
   
   shader -layer $floorLayer
      validateRenderShaderContext -vertexFormat position 0 required
      validateRenderShaderContext -vertexFormat texcoord 0 required
      validateRenderShaderContext -viewerRenderType viewerRenderType
      
      set stdMatSpecCoef (0, 0, 0)
      set stdMatSpecPower 0

		if ($caustics)
		 pass -fixedFunction -modifiedEachFrameHint      
		else
		 pass -fixedFunction
		endif

      ffDepthOffset 0
      
      if ($hasCutout)                         
         depthTestFunction acceptIfEqual
      else
         depthTestFunction acceptIfLessOrEqual
      endif
      
      # empirically, Floors seem to only take 3 inputs
      # the base texture
      # the light map
      # the material color, which seems to act as a 'tune' value.
      
      # Lightmaps are scaled by 0.5, so this must multiply by 2 to get to the correct brightness.
      # No alpha blending is required, nor is alpha scaling required.
   
         # # don't pre-scale -- that's in the texture.
         fillmode $stdMatFillMode
             
         if ($lightMapAvailable)

            colorScalar ($stdMatDiffCoef) 1

				stage 
					create SelectFloorLightMap()
		              
					# add the lightmap lighting to any direct lights.
					# the light map has been prescaled by 0.5
					textureBlend multiply(texture colorScalar) select(texture)
				end
            
            stage
               texture $stdMatBaseTextureName ${stdMatBaseTextureParam}
		            
               textureAddressing tile tile
               ffTextureMatrix -scalev (1/$floorMaterialScaleU, 1/$floorMaterialScaleV)
               ffTextureCoordsSource 0
		
               textureBlend multiplyScale2(texture outRegister) select(colorScalar)
            end 
            
         else
         
         # no lightmap case:

            
            colorScalar ($stdMatDiffCoef) 1
            
            stage
               texture $stdMatBaseTextureName ${stdMatBaseTextureParam}
		            
               textureAddressing tile tile
               ffTextureMatrix -scalev (1/$floorMaterialScaleU, 1/$floorMaterialScaleV)
               ffTextureCoordsSource 0
               
              textureBlend multiply(colorScalar texture) select(colorScalar)
            end
          
            

         endif
		         
			
			
		end 

      if ( $lightMapAvailable)  # thumbnails don't have lightmaps, causing this to fail without them, so assume no work to be done without lightmaps.
      
         if ($lmIntegratedShadows )
            # Still experimental
            pass -fixedFunction
               create LightingStatesNoStdLights()
               fillmode $stdMatFillMode
               
               alphaBlend srcFactor(destColor) add dstFactor(zero)
               
               alphaTest true 100
               alphaTestFunction acceptIfGreater
   
               colorScalar (0.61, 0.61, 0.61)  # needs to be set by tsUserEtc
   
               ffDepthOffset 1
   
               stage
                  create SelectFloorLightMap()
                  textureBlend select(colorScalar) select(texture)
               end 
            end
         elseif ((not ($useHWShader2Path or $useHWShader1Path)))
            # Mark the depth buffer where the shadow is so object shadows
            # do not overlap.
            pass -fixedFunction
               create LightingStatesNoStdLights()
               alphaBlend srcFactor(zero) add dstFactor(one)
               fillmode $stdMatFillMode
   
               ffDepthOffset 1
               depthTest true -enableDepthWrite true
               alphaTest true 100
               alphaTestFunction acceptIfLess
   
               stage
                  create SelectFloorLightMap()
                  textureBlend select(texture) select(texture)
               end 
            end
         endif
      endif
      
		create HighlightPass()
	end
  
	
   
enddef


#beginshader FloorReflective
#description Basic floor tile shader with reflection; texture + floor gradient + shadows
#extraparam float floorMaterialScaleU 1 0.125 64 ; no. tiles to map for U axis, use any positive number
#extraparam float floorMaterialScaleV 1 0.125 64 ; no. tiles to map for V axis, use any positive number
#extraparam float reflectStrength 1 0 1 ; strength of reflection, in range 0 to 1

set ratioH 1   # default material parameter value
set ratioW 1   # default material parameter value
set useReflectionFloors 0 # default material parameter value
define FloorReflective()
	material
		shader
			#reflective floors are currently dead. might ressurect them in an expansion pack
				
		end
	end
enddef



#
# gridMaterial -- composites the alpha grid texture over the normal floor texture 
#                 NOTE: In order to guarantee this is drawn on top of the normal
#                 floor tile textures, the layer has to be higher than that for
#                 the normal floor textures.

define TileGridMaterial()

	material
      if (viewerRenderType = $kRenderTypeNormal)
      
         shader -layer $gridLayer
            
               # this is using modifiedEachFrameHint, because when the pool tool
               #   is used it does not invalidate the entire terrain or invalidate the frame.
               pass -fixedFunction # -modifiedEachFrameHint
                  validateRenderShaderContext -viewerRenderType $kRenderTypeNormal  # normal render
            
                  create LightingStatesNoStdLights()
                  alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
                  
                  # Add an alpha test to avoid processing fully transparent pixels
                  alphaTest true 0
                  alphaTestFunction acceptIfGreater                  
                     
                  # Since the terrain has identical geometry, and is assumed to be rendered
                  # before the grid, there is no need to write to the z-buffer again.  If
                  # the geometry of the grid diverges from the geometry of the terrain, we
                  # *may* want to reenable depth writes here.
                  
                  depthTest true -enableDepthWrite false 
                  ffDepthOffset 2
                  fillmode $stdMatFillMode
                  colorScalar (0,0,0) $floorGridAlpha
                  stage
                     texture $stdMatBaseTextureName ${stdMatBaseTextureParam}
                     ffTextureCoordsSource 0
                     textureBlend multiply(texture colorScalar) multiply(texture colorScalar)
                  end 
               end
            
         end #shader
      else
         shader
         
         end
      endif
	end #mat
enddef

#
# inverseGridMaterial -- composites the inverse of the alpha grid texture over the normal floor texture 
#                 NOTE: In order to guarantee this is drawn on top of the normal
#                 floor tile textures, the layer has to be higher than that for
#                 the normal floor textures.

define InverseTileGridMaterial()

	#trace "$currentMaterialName  inverse tile grid material"
	
   material
		shader -layer $gridLayer
         if (viewerRenderType = $kRenderTypeNormal)
      
            create DetermineHardwareSupport()
            
            if ($useHWShader1Path or $useHWShader2Path)
               create PixelShaderInverseTileGridRendering()
            else
               # this pass draws the completely opaque region of the grid line
               # hiding the incorrect sorting behavior of the second pass at high
               # resolution mipmap levels
               pass -fixedFunction
                  create LightingStatesNoStdLights()
                  alphaTest true 192
                  alphaTestFunction acceptIfGreater
                  fillmode $stdMatFillMode
   
                  stage
                     texture $stdMatBaseTextureName ${stdMatBaseTextureParam}
                     ffTextureCoordsSource 0
                     textureBlend select(texture:invert) select(texture)
                  end 
               end 
   
               # this pass draws the transition region along the edges of the grid lines
               # this provides a blurry grid at lower mipmap levels (where the solid grid
               # line disappears entirely)
               pass -fixedFunction
                  create LightingStatesNoStdLights()
                  alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
                  alphaTest true 192
                     alphaTestFunction acceptIfLess
                  depthTest true -enableDepthWrite false 
                  fillmode $stdMatFillMode
   
                  stage
                     texture $stdMatBaseTextureName ${stdMatBaseTextureParam}
                     ffTextureCoordsSource 0
                     textureBlend select(texture:invert) select(texture)
                  end 
               end 
            endif
         end
      else
         shader
         
         end
      endif
	end
enddef


define TileLocalGridMaterial()
   material
      # 7/26/04 This material should only be reinstated if the cursor moves a part that causes 
      # visible damage to be updated with respect to where it is moved.  Marking all the 
      # terrain tiles with this modifiedEachFrameHint is too slow.  For now this material
      # is disabled. 
      
      if (viewerRenderType = $kRenderTypeNormal)
      
         attributes
            attribute alphaScale float1
            attribute alphaTrans float2
         end
         
         shader -layer $gridLayer
            vertexFormatPred blendindices  0 false
            vertexFormatPred targetindices 0 false
            
            # Local grid is revelated across the multiple tiles and it does not track damage.
            # Using modifiedEachFrameHint so that grid lines are not left behind.
            pass -fixedFunction # -modifiedEachFrameHint
               create LightingStatesNoStdLights()
               alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
               # Add an alpha test to avoid processing fully transparent pixels
               alphaTest true 0
               alphaTestFunction acceptIfGreater
               # Since the terrain has identical geometry, and is assumed to be rendered
               # before the grid, there is no need to write to the z-buffer again.  If
               # the geometry of the grid diverges from the geometry of the terrain, we
               # *may* want to reenable depth writes here.
               depthTest true -enableDepthWrite false 
               fillmode $stdMatFillMode
               
               ffDepthOffset 2   # above the shadow/overlay layer.
   
               colorScalar (0,0,0) $floorGridAlpha
               
               stage
                  texture "localgrid-alphafadeout" ${stdMatBaseTextureParam}
                  ffTextureCoordsSource 0
                  textureAddressing clamp clamp
                  textureTransformType vector2
                  ffTextureMatrix -scale @alphaScale -trans @alphaTrans
                  textureBlend select(outRegister) multiply(texture colorScalar)
               end
               
               stage
                  texture $stdMatBaseTextureName ${stdMatBaseTextureParam}
                  ffTextureCoordsSource 0            
                  textureBlend multiply(texture colorScalar) multiply(texture outRegister)
               end
            end
         end
      else
         shader
         
         end
      endif
   end			
enddef


define SelectFloorLightMap()
   texture "floorLightMap_${page}"
   ffTextureCoordsSource 1
enddef

define SelectFloorIncidenceMap()
   texture "floorIncidenceMap_${page}"
   ffTextureCoordsSource 1
enddef


# PS highlighting done in the shader instead of normal maps.

define HighlightPass()
   if ($floorHighlightOn)
      # pass for the additive part of the highlight texture
      pass -fixedFunction
         create LightingStates()
         alphaBlend srcFactor(one) add dstFactor(one)  # just add the highlight to whatever was there
         
         # Add an alpha test to avoid processing fully transparent pixels
         alphaTest true 0
      	 alphaTestFunction acceptIfGreater

         fillmode $stdMatFillMode

         colorScalar ($floorHighlightIntensity)  # adjust highlight texture brightness

         stage
            texture "floor_selection_colors"
            ffTextureCoordsSource 0  # use the floor pattern texture coordinates
            textureBlend multiplyAdd(texture colorScalar outRegister) select(texture)
         end
      end

      # pass for the subtractive part of the highlight texture
      pass -fixedFunction
         create LightingStates()
         alphaBlend srcFactor(one) sub dstFactor(one)  # just add the highlight to whatever was there
         
         # Add an alpha test to avoid processing fully transparent pixels
         alphaTest true 0
      	 alphaTestFunction acceptIfEqual

         fillmode $stdMatFillMode

         colorScalar ($floorHighlightIntensity)  # adjust highlight texture brightness

         stage
            texture "floor_selection_colors"
            ffTextureCoordsSource 0  # use the floor pattern texture coordinates
            textureBlend multiplyAdd(texture colorScalar outRegister) select(texture)
         end
      end
   endif
enddef

# Empty tile
materialDefinition tileshaderempty
   setDefinition Null
end

materialDefinition tileShaderMayLevel_0
   setDefinition SolidColorMaterial
   addParam scLayer $previewLayer
   addParam color (0,1,0)   
end

materialDefinition tileShaderMayNotLevel_0
   setDefinition SolidColorMaterial   
   addParam scLayer $previewLayer
   addParam color (1,0,0)   
end

materialDefinition tileShaderMayLevel_0_
   setDefinition SolidColorMaterial
   addParam scLayer $previewLayer
   addParam depthOffset 2
   addParam color (0,1,0)   
end

materialDefinition tileShaderMayNotLevel_0_
   setDefinition SolidColorMaterial
   addParam scLayer $previewLayer
   addParam depthOffset 2
   addParam color (1,0,0)   
end


# Terrain grid
materialDefinition floorGridBlack
   setDefinition TileGridMaterial
   addParam stdMatBaseTextureName floor-grid
end

# Local Terrain grid
materialDefinition floorLocalGridBlack
   setDefinition TileGridMaterial # TileLocalGridMaterial
   addParam stdMatBaseTextureName floor-grid
end

# Upper floor grid
materialDefinition floorGridWhite
   setDefinition InverseTileGridMaterial
   addParam stdMatBaseTextureName floor-grid
end

# Active-level Terrain grid
materialDefinition floorGridBlackActiveLevel
   setDefinition TileGridMaterial # TileLocalGridMaterial
   addParam stdMatBaseTextureName floor-grid-active
end

# Active-level Local Terrain grid
materialDefinition floorLocalGridBlackActiveLevel
   setDefinition TileGridMaterial # TileLocalGridMaterial
   addParam stdMatBaseTextureName floor-grid-active
end

# Active-level Upper Floor grid
materialDefinition floorGridWhiteActiveLevel
   setDefinition InverseTileGridMaterial
   addParam stdMatBaseTextureName floor-grid-active
end


materialDefinition floor_oak_seethrough
   setDefinition FloorReflective
   addParam stdMatLayer 2
   addParam stdMatBaseTextureName floor-oak
   addParam reflectStrength .3
end

materialDefinition floor_mountainFogTile
   setDefinition FloorReflective
   addParam stdMatLayer 2
   addParam stdMatBaseTextureName floor-mountainFogTile
   addParam reflectStrength .1
end

materialDefinition floor_brickPatio
   setDefinition Floor
   addParam stdMatBaseTextureName floor-brickPatio
   addParam stdMatDiffCoef (0.63, 0.63, 0.56)
end

materialDefinition FloorThickness
   setDefinition StandardMaterial
   addParam   stdMatSpecPower 0
   addParam   stdMatDiffCoef (0.5, 0.5, 0.5)
   addParam   stdMatBaseTextureName floor-edge
   addParam   stdMatBaseTextureEnabled true
end

niol 23:47, 11 March 2007 (CST)