ShaderNeighborhood
From SimsWiki
EP5-SS
0xCD7FE87A
0x1C0532FA
0x26B3DB7C
0xFF3A262A
# neighborhood
#
# Shaders for neighborhood
#
#
# layers
# normal shadows are layer 2 (after opaques), tree shadows are moved to -2 to make them
# render to the first buffer. Tree shadows (-2) do not show up on fields (7).
seti nhoodWaterLayer 1
seti nhoodCanvasLayer -8
seti nhoodTreeShadowLayer -2
setf neighborhoodMaterialScaleU 8.0 # defaults for neighborhood materials without these defined
setf neighborhoodMaterialScaleV 8.0 # defaults for neighborhood materials without these defined
setf nhoodWaterMap1Scale 7.0
setf nhoodWaterMap1Speed 0.5
setf nhoodWaterMap2Scale 5.0
setf nhoodWaterMap2Speed 0.3
setv2 baseTexOffset (0.5, 0.5)
setv3 nhoodDiffCoef (0.75, 0.93, 0.75)
setf nhoodPaintTextureScale 13 #Repeat distance of neighborhood textures in tiles.
#NOTE: There is a related parameter called "TextureVariantGridSize" in
#NeighborhoodTerrain.ini. You would normally (though not necessarily) want it to be
#the same as this number.
setf waterEdgeTextureScale 250.0 #Repeat distance in meters
setf terrainEdgeTextureScale 100.0 #Repeat distance in meters
# Reflective water
setc nhoodWaterReflColour (0.55, .6, 0.65)
setf nhoodWaterReflStrength 0.75
setf nhoodWaterReflOffset 0.0020
# Standard water
setf nhoodWaterbumpMapScale 8.0
setf nhoodWaterAlpha 0.35
setb isDay true
setb isTerrainConcrete false
# water clipping plane
setf waterHeight 312.45
# underwater gradient texture
set waterGradientTexture neighborhood-underwater-gradient
set waterGradientTextureAdditive neighborhood-underwater-gradient-with-black
# depth at which the gradient starts to take effect
setf waterGradientZoneStart 0
# how far down the gradient goes from that point.
setf waterGradientZoneSize 40
set skyboxCubeMap neighborhood-sky2-envcube
# bump mapping
setv3 nhoodSunDir (-0.5, 1, 0.5) # default -- should be set by code from the lighting.txt value
# overall kind-of brightness booster for bump map.
setf bumpMapBoost 1.5
# ==============================================================================
# derived bump map quantities
define BiasedNormal(n bn)
setf nLen (sqrt(sqr($&{n}.x) + sqr($&{n}.y) + sqr($&{n}.z)))
setv3 &{bn} ((0.5,0.5,0.5) * (($&{n} / $nLen.xxx) + (1,1,1)))
enddef
create BiasedNormal(nhoodSunDir nhoodSunDirBiased)
setv3 nhoodSunDirBiased ($nhoodSunDirBiased * $bumpMapBoost.xxx)
set terrainType "unset"
# defaults off, can be turned on at startup.
setb simpleTerrain false
setb isImposter false
include neighborhoodSWVS.matShad
# ==============================================================================
define NeighborhoodCanvas()
# this material does nothing but prep the z-buffer, and render black.
material
if ($simpleTerrain)
shader
end
endif
shader -layer (($nhoodCanvasLayer) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
if (not $isImposter)
validateRenderShaderContext -vertexFormat texcoord 0 required
endif
viewerRenderTypePred viewerRenderType
create DetermineHardwareSupport()
if (strcmp("Concrete", "${terrainType}") = 0)
setb isTerrainConcrete true
endif
if (not $isUnderWater or viewerRenderType != $kRenderTypeReflection)
if ($useSWVertexShaderPath)
create NeighborhoodTerrainPrepWorkSWVS()
else
pass -fixedFunction
create LightingStatesNoStdLights()
cullmode none # so that reflections don't "creep under" edge of terrain
colorScalar (0.0, 0.0, 0.0, 1.0)
if ($isImposter and $isTerrainConcrete)
ffDepthOffset -1
endif
stage
if (not $isImposter)
ffTextureCoordsSource fromPosition
endif
textureBlend select(colorScalar) select(outRegister)
end
end
endif
endif
end
end
enddef
# ==============================================================================
# Used for those triangles in the canvas which are partially under water.
#
define NeighborhoodCanvasStraddle()
material
if ($simpleTerrain)
shader
end
endif
# material for reflection camera
shader -layer (($nhoodCanvasLayer) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
viewerRenderTypePred $kRenderTypeReflection
#Render the portion that is above water only
create DetermineHardwareSupport()
if ($useSWVertexShaderPath)
create NeighborhoodWaterlineStraddleSWVS()
else
pass -fixedFunction
create LightingStatesNoStdLights()
alphaBlend srcFactor(one) add dstFactor(zero)
cullmode none # so that reflections don't "creep under" edge of terrain
colorScalar (0.0, 0.0, 0.0, 1.0)
alphaTest true 128
alphaTestFunction acceptIfGreater
stage
# above water -- clip by using depth-based 0/1 texture.
texture blackWhite
textureAddressing clamp clamp
textureFilterHint point point
textureMIPFilterHint disabled
ffTextureMatrix -cameraToGlobal -order zzzw -trans ($waterHeight - 0.5, 0) -invert
ffTextureCoordsSource fromPosition
textureBlend select(colorScalar) select(texture)
end
end
endif
end
#material for standard camera
#shader -layer (-128)
shader -layer (-128)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
viewerRenderTypePred $kRenderTypeNormal
create DetermineHardwareSupport()
if ($useSWVertexShaderPath)
create NeighborhoodWaterlineStraddleStandardCameraSWVS()
else
#Render the portion that is above water only
pass -fixedFunction
create LightingStatesNoStdLights()
alphaBlend srcFactor(one) add dstFactor(zero)
cullmode none # so that reflections don't "creep under" edge of terrain
colorScalar (0.0, 0.0, 0.0, 1.0)
stage
textureBlend select(colorScalar) select(outRegister)
end
end
endif
end
end
enddef
# ==============================================================================
# Material for terrain geometry that is partially or completely under water.
define NeighborhoodWaterTerrain()
material
if ($simpleTerrain)
shader
end
endif
shader -layer (($nhoodCanvasLayer + 2) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
viewerRenderTypePred viewerRenderType
create DetermineHardwareSupport()
if (viewerRenderType != $kRenderTypeReflection)
if ($useSWVertexShaderPath)
create NeighborhoodUnderWaterTerrainSWVS()
else
pass -fixedFunction
create LightingStatesNoStdLights()
alphaBlend srcFactor(destColor) add dstFactor(zero)
cullmode none # so that reflections don't "creep under" edge of terrain
# apply depth-based gradient texture to terrain that is under water.
stage
texture $waterGradientTexture
if ($cubeMapSupport)
textureAddressing tile clamp
else
textureAddressing clamp clamp
endif
set d ($waterHeight - $waterGradientZoneStart)
set s (-$waterGradientZoneSize)
ffTextureMatrix -cameraToGlobal -order xzyw -scale $s -trans (0, $d) -invert
ffTextureCoordsSource fromPosition
textureBlend select(texture) select(outRegister)
end
end
endif
endif
end
end
enddef
# ==============================================================================
define NeighborhoodTerrainPaintShader()
shader -layer (($nhoodCanvasLayer + 1) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
if (not $isImposter)
validateRenderShaderContext -vertexFormat texcoord 0 required
endif
create DetermineHardwareSupport()
if (strcmp("Concrete", "${terrainType}") = 0)
setb isTerrainConcrete true
endif
if ($useSWVertexShaderPath)
create NeighborhoodMainTerrainShaderSWVS()
else
pass -fixedFunction
create LightingStatesNoStdLights()
alphaBlend srcFactor(srcAlpha) add dstFactor(one)
cullmode none # so that reflections don't "creep under" edge of terrain
if ($isImposter and $isTerrainConcrete)
ffDepthOffset -1
endif
colorScalar $nhoodSunDirBiased
depthTest true -enableDepthWrite false
depthTestFunction acceptIfEqual
seti snowLevel (tsHasSnow)
if ($snowLevel = 1)
set weatherSuffix "-LSNOW"
elseif ($snowLevel = 2)
set weatherSuffix "-HSNOW"
else
set weatherSuffix ""
endif
stage
texture $alphaMap
textureAddressing clamp clamp
if ($isImposter)
ffTextureMatrix -cameraToGlobal -scalev ((0.1 * $alphaMapScaleU), (0.1 * $alphaMapScaleV))
ffTextureCoordsSource fromPosition
else
ffTextureMatrix -scalev ($alphaMapScaleU, $alphaMapScaleV)
ffTextureCoordsSource 0
endif
textureBlend select(outRegister) select(texture)
end
stage
texture "${paintTexture}${weatherSuffix}"
textureAddressing tile tile
if ($isImposter)
ffTextureMatrix -cameraToGlobal -scalev ((10.0 * $nhoodPaintTextureScale), (10.0 * $nhoodPaintTextureScale)) -invert
ffTextureCoordsSource fromPosition
else
ffTextureMatrix -scalev ($nhoodPaintTextureScale, $nhoodPaintTextureScale) -invert
ffTextureCoordsSource 0
endif
textureBlend select(texture outRegister) select(outRegister)
end
end
endif
end
enddef
define NeighborhoodTerrainPaint()
material
if ($simpleTerrain)
shader
end
endif
create NeighborhoodTerrainPaintShader()
end
enddef
# ==============================================================================
set ratioH 1 # default material parameter value
set ratioW 1 # default material parameter value
set useReflection 0 # default material parameter value
define NeighborhoodWater()
material
# never draw water in its reflection. Already handled by code.
if ($simpleTerrain)
shader -layer $nhoodWaterLayer
pass -fixedFunction
colorScalar (0.3, 0.4,0.8) 1.0
stage
textureBlend select(colorScalar) select(colorScalar)
end
end
end
endif
# First option: reflection mapped water.
if ($useReflection)
shader -layer $nhoodWaterLayer
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
viewerRenderTypePred viewerRenderType
################################################################################
# Three pass/2 texture rippled reflection -- does not run on GeF2 only 2 stages (for GeF4+)
pass -fixedFunction -modifiedEachFrameHint
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
colorScalar $nhoodWaterReflColour $nhoodWaterReflStrength
depthTest true -enableDepthWrite false
stage
ffTextureCoordsSource fromPosition
ffTextureMatrix -cameraToClip -scalev ((-0.5 * $ratioW), (-0.5 * $ratioH)) -trans (0.5, 0.5)
textureAddressing clamp clamp
texture "ScreenReflection"
textureBlend multiply(texture colorScalar) select(outRegister) tempRegister
end
stage
ffTextureCoordsSource fromPosition
ffTextureMatrix -cameraToClip -scalev ((-0.5 * $ratioW), (-0.5 * $ratioH)) -trans (0.5 + $nhoodWaterReflOffset, 0.5 + $nhoodWaterReflOffset)
textureAddressing clamp clamp
texture "ScreenReflection"
textureBlend multiply(texture colorScalar) select(outRegister)
end
stage
texture "neighborhood-water-1"
textureAddressing tile tile
# -atrans waveformType cycles/sec offset (startU, startV) (endU, endV)
textureMatrixAnimation -targetType fixedFunction -atrans sawtooth ($nhoodWaterMap1Speed / $nhoodWaterMap1Scale) 0 (0, 0) ($nhoodWaterMap1Scale, 0) -ascale sawtooth 1 0 ($nhoodWaterMap1Scale, $nhoodWaterMap1Scale)
ffTextureCoordsSource 0
textureBlend lerpTextureAlpha(tempRegister outRegister) select(colorScalar)
end
end
end
shader -layer $nhoodWaterLayer
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
viewerRenderTypePred viewerRenderType
################################################################################
# Two stage case since the three stage case above fails on most low end hardware because of its third stage (GF2).
pass -fixedFunction -modifiedEachFrameHint
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
colorScalar $nhoodWaterReflColour $nhoodWaterReflStrength
depthTest true -enableDepthWrite false
stage
ffTextureCoordsSource fromPosition
ffTextureMatrix -cameraToClip -scalev ((-0.5 * $ratioW), (-0.5 * $ratioH)) -trans (0.5, 0.5)
textureAddressing clamp clamp
texture "ScreenReflection"
textureBlend multiply(texture colorScalar) select(outRegister)
end
stage
texture "neighborhood-water-1"
textureAddressing tile tile
# -atrans waveformType cycles/sec offset (startU, startV) (endU, endV)
#textureMatrixAnimation -targetType fixedFunction -atrans sawtooth ($nhoodWaterMap1Speed / $nhoodWaterMap1Scale) 0 (0, 0) ($nhoodWaterMap1Scale, 0) -ascale sawtooth 1 0 ($nhoodWaterMap1Scale, $nhoodWaterMap1Scale)
ffTextureCoordsSource 0
textureBlend lerpTextureAlpha(outRegister outRegister) select(colorScalar)
end
end
end
endif
################################################################################
# fallback: no reflection.
shader -layer ($nhoodWaterLayer)
viewerRenderTypePred viewerRenderType
create DetermineHardwareSupport()
pass -fixedFunction
# For now, we are diabling the lighting since we simply want to use the vertex colors.
create LightingStatesNoStdLightsParam(false true)
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
colorScalar (.4, .6, .9, .6)
fillmode $stdMatFillMode
stage
#texture reflectionoutdoorwater-envcube
if ($cubeMapSupport)
texture $skyboxCubeMap
textureMIPFilterHint disabled
ffTextureCoordsSource fromReflectionVector
ffTextureMatrix -orientCameraToGlobal
textureAddressing clamp clamp clamp
textureBlend multiply(texture colorScalar) select(colorScalar)
else
textureBlend select(colorScalar) select(colorScalar)
endif
end
end
end
################################################################################
# Final fallback.
#<shader -layer ($nhoodWaterLayer)
viewerRenderTypePred viewerRenderType
pass -fixedFunction
fillmode $stdMatFillMode
create LightingStatesNoStdLights()
alphaBlend srcFactor(one) add dstFactor(srcAlpha)
colorScalar (.2, .3, .5, .05)
stage
textureBlend select(colorScalar) select(colorScalar)
end
end
end#>
create NeighborhoodWaterSWVS()
end
enddef
# ==============================================================================
# The layer ID for this should be lower than "nhoodWaterLayer" Id because we want the farther side of the water box should be
# drawn as well.
# the layer ID of any under-water objects (so
define NeighborhoodWaterEdge()
material
if ($simpleTerrain)
shader
end
endif
shader -layer (($nhoodWaterLayer - 1) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
pass -fixedFunction
create LightingStates()
alphaBlend srcFactor(one) add dstFactor(zero)
cullmode cullCounterClockwise
stage
texture $waterEdgeTexture
textureAddressing tile tile
ffTextureMatrix -scalev (1/$waterEdgeTextureScale, 1/$waterEdgeTextureScale)
ffTextureCoordsSource 0
textureBlend select(texture) select(diffuse)
end
end
end
end
enddef
# ==============================================================================
define NeighborhoodTerrainEdge()
material
if ($simpleTerrain)
shader
end
endif
shader -layer (($nhoodCanvasLayer + 13) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
pass -fixedFunction
create LightingStates()
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
stage
texture $terrainEdgeTexture
textureAddressing tile tile
ffTextureMatrix -scalev (1/$terrainEdgeTextureScale, 1/$terrainEdgeTextureScale)
ffTextureCoordsSource 0
textureBlend multiply(texture diffuse) select(texture)
end
end
end
end
enddef
#==============================================================================
define NHoodTerrainLighting()
set terrainRepresentativeTexture "lottexture-test-01_detail"
material
shader -layer (($nhoodCanvasLayer + 3) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
if (not $isImposter)
validateRenderShaderContext -vertexFormat texcoord 0 required
endif
if (strcmp("Concrete", "${terrainType}") = 0)
setb isTerrainConcrete true
endif
if ($simpleTerrain)
if (strcmp("Desert", "${terrainType}") = 0)
set terrainRepresentativeTexture "lottexture-canvas-desert"
endif
shader
pass -fixedFunction
ffDepthOffset -1
stage
texture "nhoodLightMap"
if ($isImposter)
ffTextureMatrix -cameraToGlobal -scalev (1280, 1280) -invert
ffTextureCoordsSource fromPosition
else
ffTextureMatrix -scalev (128, 128) -invert
ffTextureCoordsSource 0
endif
textureBlend select(texture) select(texture)
end
stage
texture $terrainRepresentativeTexture
if ($isImposter)
ffTextureMatrix -cameraToGlobal -scalev (160, 160) -invert
ffTextureCoordsSource fromPosition
else
ffTextureMatrix -scalev (16, 16) -invert
ffTextureCoordsSource 0
endif
#textureBlend multiply(texture outRegister) select(outRegister)
textureBlend select(texture outRegister) select(outRegister)
end
end
end
endif
create DetermineHardwareSupport()
if ($useSWVertexShaderPath)
create NeighborhoodTerrainLightingSWVS()
else
pass -fixedFunction
create LightingStatesNoStdLights()
# standard Lightmap * dest
alphaBlend srcFactor(destColor) add dstFactor(zero)
# if the outbound 'clip' texture has 0 in it, don't emit those pixels.
alphaTest true 127
alphaTestFunction acceptIfGreater
fillmode $stdMatFillMode
if ($isImposter and $isTerrainConcrete)
ffDepthOffset -1
endif
depthTestFunction acceptIfEqual
# emit the lightmap
stage
texture "nhoodLightMap"
if ($isImposter)
ffTextureMatrix -cameraToGlobal -scalev (1280, 1280) -invert
ffTextureCoordsSource fromPosition
else
ffTextureMatrix -scalev (128, 128) -invert
ffTextureCoordsSource 0
endif
if (tsHasSnow >= 1)
colorScalar (0.3, 0.3, 0.35, 0)
else
colorScalar (0, 0, 0, 0)
endif
textureBlend add(texture colorScalar) select(texture)
end
# modulate by the 'above water' texture, which is a 2x1 texture with black and white in it.
stage
# above water -- clip by using depth-based 0/1 texture.
texture blackWhite
textureAddressing clamp clamp
textureFilterHint point point
textureMIPFilterHint disabled
ffTextureMatrix -cameraToGlobal -order zzzw -trans ($waterHeight - 0.5, 0) -invert
ffTextureCoordsSource fromPosition
textureBlend multiply(texture:alphaReplicate outRegister) select(texture)
end
end
endif
end
end
enddef
# ==============================================================================
define NHoodTerrainHighlightMaterial()
material
shader -layer (($nhoodCanvasLayer + 9) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
create DetermineHardwareSupport()
if ($useSWVertexShaderPath)
create NeighborhoodTerrainHighlightSWVS()
else
pass -fixedFunction
create LightingStates()
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
fillmode $stdMatFillMode
colorScalar (1, 1, 1, $highlightAlpha)
stage
texture $highlightTexture
textureAddressing tile tile
textureBlend select(texture) multiply(texture colorScalar)
end
end
endif
end
end
enddef
# ==============================================================================
define NHoodTerrainOutlineHighlightMaterial()
material
shader -layer (($nhoodCanvasLayer + 10) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
pass -fixedFunction
create LightingStatesNoStdLights()
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
fillmode $stdMatFillMode
depthTest true -enableDepthWrite false
stage
texture $texture
textureAddressing clamp clamp
ffTextureCoordsSource 0
textureBlend select(texture) select(texture)
end
end
end
end
enddef
# ==============================================================================
setb nhoodIsPartlyUnderwater false
define PartiallyUnderWaterMaterial()
seti vt viewerRenderType
## prevents the thumbnails of rocks and such from being 'under water', by punting to standard material.
# thumbnails are rendered at 0,0,0, but water tends to be above them at 312 ft/yards whatever.
if (viewerRenderType = $kRenderTypeThumbnail)
create StandardMaterial()
else
create UnderWaterShadingMaterial()
endif
enddef
define UnderWaterShadingMaterial()
material
shader -layer (($nhoodCanvasLayer + 4) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -viewerRenderType viewerRenderType
if ($stdMatBaseTextureEnabled)
validateRenderShaderContext -vertexFormat texcoord 0 required
endif
pass -fixedFunction
ffMatCoef -amb $stdMatDiffCoef -ambAlpha $stdMatAlphaMultiplier -diff $stdMatDiffCoef -diffAlpha $stdMatAlphaMultiplier -emit $stdMatEmissiveCoef -emitAlpha $stdMatAlphaMultiplier -spec $stdMatSpecCoef -specPow $stdMatSpecPower
create StandardShaderFBAlphaState($stdMatAlphaBlendMode)
fillmode $stdMatFillMode
cullmode $stdMatCullMode
create LightingStates()
stage
create StandardShaderTextureState(Base)
textureBlend multiply(texture outRegister) multiply(texture outRegister)
end
#################################################################
if ($stdMatIsPartlyUnderwater and tsIsInNeighborhood)
if (viewerRenderType = $kRenderTypeReflection)
alphaTest true 128
alphaTestFunction acceptIfGreater
stage
# above water -- clip by using depth-based 0/1 texture.
texture blackWhite
textureAddressing clamp clamp
textureFilterHint point point
textureMIPFilterHint disabled
ffTextureMatrix -cameraToGlobal -order zzzw -trans ($waterHeight - 0.5, 0) -invert
ffTextureCoordsSource fromPosition
textureBlend multiply(texture outRegister) select(texture)
end
else
stage
# would we want to source this from somewhere?
texture $waterGradientTexture
textureAddressing tile clamp
set d ($waterHeight - $waterGradientZoneStart)
set s (-$waterGradientZoneSize)
ffTextureMatrix -cameraToGlobal -order xzyw -scale $s -trans (0, $d) -invert
ffTextureCoordsSource fromPosition
textureBlend multiply(texture outRegister) select(outRegister)
end
endif
else
# if we are in lot mode and we want to fade this shape
if (numLightsOfType(${kShapeColorLight}) != 0)
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
depthTest true -enableDepthWrite false
colorScalar (1, 1, 1, 1) -applyShapeColor 0
stage
textureBlend select(outRegister) select(colorScalar)
end
endif
endif
#################################################################
end
seti weatherLightCount (numLightsOfType(${kWeatherLight}))
end
# fallback shader, no darken by depth, since "FromPosition" tends to be totally FUBAR in SWVP.
shader -layer (($nhoodCanvasLayer + 4) * 8)
pass -fixedFunction
ffMatCoef -amb $stdMatDiffCoef -ambAlpha $stdMatAlphaMultiplier -diff $stdMatDiffCoef -diffAlpha $stdMatAlphaMultiplier -emit $stdMatEmissiveCoef -emitAlpha $stdMatAlphaMultiplier -spec $stdMatSpecCoef -specPow $stdMatSpecPower
create StandardShaderFBAlphaState($stdMatAlphaBlendMode)
fillmode $stdMatFillMode
cullmode $stdMatCullMode
create LightingStates()
stage
create StandardShaderTextureState(Base)
textureBlend multiply(texture outRegister) multiply(texture outRegister)
end
# if we are in lot mode and we want to fade this shape
if (not tsIsInNeighborhood and numLightsOfType(${kShapeColorLight}) != 0)
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
depthTest true -enableDepthWrite false
colorScalar (1, 1, 1, 1) -applyShapeColor 0
stage
textureBlend select(outRegister) select(colorScalar)
end
endif
end
end
end
enddef
# ===================================================================================
define ImposterArrowMaterial()
material
shader -layer (($nhoodCanvasLayer + 11) * 8)
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
pass -fixedFunction
create LightingStatesNoStdLights()
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
fillmode $stdMatFillMode
# TODO: change this, cannot turn off depth since that is used for dirty rect
depthTest false -enableDepthWrite false
stage
texture $texture
textureAddressing tile tile
ffTextureCoordsSource 0
textureBlend select(texture) select(texture)
end
end
end
end
enddef
# ===================================================================================
define NeighborhoodTreeGUOBMaterial()
# $stdMatTextureName
# $stdMatAlphaMulitplier
# TODO: fix these so that they are not hardcoded, must be passed through content
set textureName "genericroundsoftguob-alpha"
setf alphaMultiplier 0.65
# try using vs_2_sw on the trees since sw vs is not as susceptible to state changes
# this only handles tree GUOBs in the nhood.
material
#the engine will try this shader first..
shader -layer $nhoodTreeShadowLayer
# shadows can never be seen in reflections (they're on the ground)
viewerRenderTypePred $kRenderTypeReflection false
pass
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
depthTest true -enableDepthWrite false
shaderProgram -target vertexProgram -method assemble
bindConstants 0 -bindingID geomToClip -constantCount 4
shaderSource
vs_1_1
dcl_position v0
dcl_texcoord v1
m4x4 oPos, v0, c0
mov oT0, v1
endShaderSource
end
shaderProgram -target pixelProgram -method assemble
shaderSource
ps_1_1
def c0,1,1,1,$alphaMultiplier
tex t0
mul r0,t0, c0
endShaderSource
end
sampler 0
texture $textureName
textureAddressing clamp clamp clamp
end
end
end
# and fall back to this one if it can't render the above.
shader -layer $nhoodTreeShadowLayer
# shadows can never be seen in reflections (they're on the ground)
viewerRenderTypePred $kRenderTypeReflection false
pass -fixedFunction
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
depthTest true -enableDepthWrite false
colorScalar (1,1,1, $alphaMultiplier)
stage
texture $textureName
textureAddressing clamp clamp clamp
textureBlend select(texture) multiply(texture colorScalar)
end
end
end
end
enddef
#=======================================================================================
define NeighborhoodBuildingMaterial()
material
shader -layer 0
setb isDay tsIsDay
setb shouldShow (($showOnDay and $isDay) or ((not $showOnDay) and (not $isDay)))
if ($shouldShow)
pass -fixedFunction
if (numLightsOfType(${kShapeColorLight}) > 0)
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
depthTest true -enableDepthWrite false
colorScalar (1, 1, 1, 1) -applyShapeColor 0
else
colorScalar (1, 1, 1, 1)
endif
if ($isDay) #lighting is only applied at day time
ffLighting -enable true -localViewer false -normalizeNormals false
create NonStandardLighting()
ffMatCoef -amb (0.8,0.8,0.8) -ambAlpha 1.0 -diff (0.8,0.8,0.8) -diffAlpha 1.0 -spec (0,0,0) -specPow 0
stage
ffTextureCoordsSource 0
texture $texMaterial
textureBlend multiply(texture diffuse) multiply(texture colorScalar)
end
else
stage
ffTextureCoordsSource 0
texture $texMaterial
textureBlend select(texture) multiply(texture colorScalar)
end
endif
end
endif
end
end
enddef
#============================================================================================
# make tree shadows render to an opaque (but blended layer) so they drop into the static layer
# this overrides the texture name and alpha blend level.
materialDefinition neighborhood_roundshadow
setDefinition NeighborhoodTreeGUOBMaterial
end
# rectangular shadows are used by the car shadows, until can pass the existing texture name onto the material,
# leave those shadows as transparent layer 7 that will get alpha sorted, etc.
#materialDefinition neighborhood_rectangularshadow
# setDefinition NeighborhoodTreeGUOBMaterial
#end
# forest
materialDefinition forest_01_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition forest_02_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
# oak
materialDefinition treeoak01_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition treeoak02_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition treeoak03_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition treeoak04_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition treeoak05_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition treeoak06_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
# scrub oak
materialDefinition neighborhoodtreescruboak_shadows_alpha
setDefinition NeighborhoodTreeGUOBMaterial
end
# birch
materialDefinition treebirch01_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition treebirch02_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition treebirch03_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition treebirch04_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition treebirch05_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
materialDefinition treebirch06_shadows
setDefinition NeighborhoodTreeGUOBMaterial
end
# TODO: need to redefine the tree shaders, at least skip in reflections
# this is also causing massive batch count for main view (scrolling)
# all trees should be combined into a single part/texture atlas with their shadows
# render them after the terrain
#materialDefinition treeoak01_diffuse
# setDefinition StandardMaterial
#end
# ===================================================================================
materialDefinition neighborhood-canvas-outOfWater
setDefinition NeighborhoodCanvas
addParam isUnderWater false
end
materialDefinition neighborhood-canvas-underwater
setDefinition NeighborhoodCanvas
addParam isUnderWater true
end
materialDefinition neighborhood-canvas-straddle
setDefinition NeighborhoodCanvasStraddle
end
materialDefinition neighborhood-underwater-terrain
setDefinition NeighborhoodWaterTerrain
end
materialDefinition waterEdgeBoxMaterial
setDefinition NeighborhoodWaterEdge
addParam waterEdgeTexture "neighborhood-sides-water"
end
materialDefinition terrainEdgeBoxMaterial
setDefinition NeighborhoodTerrainEdge
addParam terrainEdgeTexture "neighborhood-sides-dirt"
end
materialDefinition nhoodTerrainLightingMaterial
setDefinition NHoodTerrainLighting
end
materialDefinition nhoodTerrainLightingMaterialImposter
setDefinition NHoodTerrainLighting
addParam isImposter true
end
materialDefinition nhoodReflectionSkybox
setDefinition SkyboxCompositionPassMaterial
addParam skyboxCubeTexture $skyboxCubeMap
end
materialDefinition lotSkirtReflectionSkybox
setDefinition SkyboxCompositionPassMaterial
addParam skyboxCubeTexture $skyboxCubeMap
end
materialDefinition lotPlacementArrow
setDefinition ImposterArrowMaterial
addParam texture lot-placement-arrow
end
# Material used in highlighting the terrain to depict a house for which no imposter exists yet.
materialDefinition DefaultResidentialLotImposterMaterial
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lothighlight-residential"
addParam highlightAlpha 0.5
end
materialDefinition DefaultCommunityLotImposterMaterial
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lothighlight-community"
addParam highlightAlpha 0.5
end
# Material used in creating a terrain thumbnail for a lot for which no imposter exists yet.
materialDefinition DefaultLotThumbnailMaterial
setDefinition StandardMaterial
addParam stdMatBaseTextureEnabled "true"
addParam stdMatBaseTextureName "lotselection-done"
addParam stdMatLightingEnabled true
addParam stdMatDiffCoef (1, 1, 1)
end
materialDefinition bridge_sides
# setDefinition StandardMaterial
setDefinition PartiallyUnderWaterMaterial
addParam stdMatAlphaBlendMode none
addParam stdMatBaseTextureEnabled true
addParam stdMatBaseTextureName bridge-sides
addParam stdMatDiffCoef (0.8, 0.8, 0.8)
addParam stdMatIsPartlyUnderwater true
end
materialDefinition cliff_boulder_material
# setDefinition StandardMaterial
setDefinition PartiallyUnderWaterMaterial
addParam stdMatAlphaBlendMode none
addParam stdMatBaseTextureEnabled true
addParam stdMatBaseTextureName nh-test-cliff
addParam stdMatDiffCoef (0.8, 0.8, 0.8)
addParam stdMatIsPartlyUnderwater true
end
materialDefinition plesiosaur_skin_material
# setDefinition StandardMaterial
setDefinition PartiallyUnderWaterMaterial
addParam stdMatAlphaBlendMode none
addParam stdMatBaseTextureEnabled true
addParam stdMatBaseTextureName plesiosaur-skin
addParam stdMatDiffCoef (0.8, 0.8, 0.8)
addParam stdMatIsPartlyUnderwater true
# these are mvoing objects, need to be at or above layer 0
addParam nhoodCanvasLayer -4
end
materialDefinition neighborhood_bouyside_material
# setDefinition StandardMaterial
setDefinition PartiallyUnderWaterMaterial
addParam stdMatAlphaBlendMode none
addParam stdMatBaseTextureEnabled true
addParam stdMatBaseTextureName neighborhood_bouyside
addParam stdMatDiffCoef (0.8, 0.8, 0.8)
addParam stdMatIsPartlyUnderwater true
# these are mvoing objects, need to be at or above layer 0
addParam nhoodCanvasLayer -4
end
materialDefinition RelationshipArchGreen
setDefinition StandardMaterial
addParam stdMatSpecPower 20
addParam stdMatDiffCoef (0.3, 1, 0.3)
addParam stdMatSpecCoef (1, 1, 1)
addParam stdMatAlphaMultiplier 0.6
addParam stdMatAlphaBlendMode blend
end
materialDefinition housePlacementOKHighlight
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lotselection-good"
addParam highlightAlpha 0.15
end
materialDefinition housePlacementNotOKHighlight
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lotselection-bad"
addParam highlightAlpha 0.15
end
materialDefinition roadIndicatorOK
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lothighlight-roadghost-good"
addParam highlightAlpha 0.75
end
materialDefinition roadIndicatorNotOK
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lothighlight-roadghost-bad"
addParam highlightAlpha 0.75
end
materialDefinition DefaultLotHighlight
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lotselection-good"
addParam highlightAlpha 0.25
end
materialDefinition ResidentialLotHighlight
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lothighlight-residential"
addParam highlightAlpha 0.40
end
materialDefinition CommunityLotHighlight
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lothighlight-community"
addParam highlightAlpha 0.40
end
materialDefinition DormLotHighlight
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lothighlight-dorm"
addParam highlightAlpha 0.40
end
materialDefinition NotOKLotHighlight
setDefinition NHoodTerrainHighlightMaterial
addParam highlightTexture "lotselection-bad"
addParam highlightAlpha 0.40
end
materialDefinition neighborhoodbuildingres1_windows_night
setDefinition NeighborhoodBuildingMaterial
addParam texMaterial neighborhoodbuildingres1_repeat-surface-night
addParam showOnDay false
end
materialDefinition neighborhoodbuildingres1_windows_day
setDefinition NeighborhoodBuildingMaterial
addParam texMaterial neighborhoodbuildingres1_repeat-surface
addParam showOnDay true
end
# this is commented out because the UI renders this without use of the material
#materialDefinition ZoomConePyramid
# setDefinition ZoomConeMaterial
# addParam baseColor (1.0, 1.0, 1.0, 0.5)
#end
define LotSkirtWater()
material
shader -layer $nhoodWaterLayer
validateRenderShaderContext -vertexFormat position 0 required
validateRenderShaderContext -vertexFormat normal 0 required
validateRenderShaderContext -vertexFormat texcoord 0 required
viewerRenderTypePred viewerRenderType
pass -fixedFunction
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
colorScalar $nhoodWaterReflColour 0.85
depthTest true -enableDepthWrite false
ffDepthOffset -2
stage
ffTextureCoordsSource fromPosition
ffTextureMatrix -cameraToClip -scalev ((-0.5 * $ratioW), (-0.5 * $ratioH)) -trans (0.5, 0.5)
textureAddressing clamp clamp
texture "ScreenReflection"
textureBlend multiply(texture colorScalar) select(colorScalar)
end
end
end
end
enddef
define LotSkirtWaterNoReflection()
material
# fallback: no reflection.
shader -layer ($nhoodWaterLayer)
viewerRenderTypePred viewerRenderType
create DetermineHardwareSupport()
pass -fixedFunction
# For now, we are diabling the lighting since we simply want to use the vertex colors.
create LightingStatesNoStdLightsParam(false true)
alphaBlend srcFactor(srcAlpha) add dstFactor(invSrcAlpha)
colorScalar (.4, .6, .9, .6)
ffDepthOffset -2
fillmode $stdMatFillMode
stage
#texture reflectionoutdoorwater-envcube
if ($cubeMapSupport)
texture $skyboxCubeMap
textureMIPFilterHint disabled
ffTextureCoordsSource fromReflectionVector
ffTextureMatrix -orientCameraToGlobal
textureAddressing clamp clamp clamp
textureBlend multiply(texture colorScalar) select(colorScalar)
else
textureBlend select(colorScalar) select(colorScalar)
endif
end
end
end
end
enddef
materialDefinition lotSkirtSea
setDefinition LotSkirtWater
end
materialDefinition lotSkirtSeaNoReflection
setDefinition LotSkirtWaterNoReflection
end
